- Version: 1.0
- Downloaded: 4042 times
- Viewed: 7898 times
- File Size: 2.66 MB
- File Type: .zip file
- Create Date: July 27, 2015
- Last Updated: July 27, 2015
This is the Swiss Army Knife of watches ...
Citizen BN-5030 HYBRID - 6 screens
Too many features to describe each, I tried to make the watch as intuitive as possible so no memory actions required...
Also tried to remain true to the analogue design criteria to make it more 'believable'...
Mode
Tap 4 -5 o'clock position to scroll forwards
Tap 7-8 o'clock position to scroll backwards
altimeter
compass
progressive time to sunrise and sunset
alternating sr/ss with dynamic moon and sun ( sunrise and sunset times swap sides of the screen depending on time, and colors swap too)
moon phase
steps, distance walked, heart rate
Calendar with minutes to next appointment
Map with zoom and scale (fine zoom)
dynamic map pointer with compass (changes scale with zoom)
Chronograph with lap time function
Weather ... ( Tap WX to update weather )
Altimeter
Tap the centre of the watch-hands to get Tasker to fetch elevation and send to watch as a variable
My elevation is 4788' here where I live.
Red hand indicates 'thousands' of feet above sea level
Yellow hand indicates 'hundreds' of feet amsl.
Left dial is battery power.
In analogue watch mode ...
Tap 6 o'clock to get compass (second hand shows compass), tap again to revert to seconds..
Tap 12 o'clock to reset bezel to 0 and lock bezel
To set bezel to current elevation/'altitude' tap 12 to unlock the bezel, then tap either on 9(-) or 3 (+) to rotate in 10' increments.....( this is so you can see your elevation difference/delta/deviation in your ascent or descent (difference between bezel and yellow hand))
tap 12 again to reset and lock bezel
Tasker file .... import this task or else altimeter won't work
In Tasker , tap and hold the top where it says TASKS, ... a pop up will apear with "import"
Import the downloaded "Wear Altitude m.xml and that's it... exit and save Tasker
File | |
---|---|
swiss_army_watchmaker.zip |