Tutorial – 10 Screen, Altitude, Distance, Speed – Watch with Tasker

Suunto Ambit 3 v3 with Altitude, distance and speed and added *daily alarm, etc
v3
Added dynamic battery meter, compass pointer, dynamic heart icon (watch your heart beat) and maps...
When in compass screen, tap on large cardinal (120°NW) at centre of screen. Tap again to cycle map view.
Tap top of screen (12 o'clock position ) to zoom map in and touch bottom (6 position ) to zoom out
as requested by +Jevgen Malahhov​​​​​​
100% made in Watchmaker
> Altimeter (needs Tasker, read below)
> Distance moved whilst stopwatch running (based on a geometric calculation between coordinates)
> speeds and progress rates (formula based)
> daily alarm
Alarm
Tap 10 o'clock (BACK LAP) to add hours
Tap 7 o'clock (VIEW) to subtract hours
Tap 2 o'clock (START STOP) to add minutes
Tap 5 o'clock (VIEW LOCK) to subtract minutes
Tap 12 o'clock to increase day
Tap 6 o'clock to decrease day
Tap centre to toggle alarm on/off (indicator works)
WiFi indicator is dynamic with on/off and WiFi strength
Stopwatch with laptime
>When the Stopwatch is running, pressing BACK LAP button at 10 o'clock toggles laptime, press again to toggle to sw.
*note...as long as the stopwatch is running, the back button is disabled as it's used for laptime.
To reset stopwatch it needs to be stopped, then press BACK and the back button is reactivated and resets stopwatch.
To use the speeds and distance
NOTE the speeds are averages between Stopwatch start and stop, NOT live speed like a GPS
When you start Stopwatch, it loads your latitude and longitude and altitude.....when you stop the stopwatch it calculates new latitude /longitude and nd works out the distance.
Then the speeds is calculated as it knows time (from the stopwatch) and distance
S=D/T
Tap VIEW to toggle light color
Tap LIGHT LOCK to lock the view, tap again to release
NEXT and BACK to go forward/backward through screens....