- Version: 1.0
- Downloaded: 1827 times
- Viewed: 4309 times
- File Size: 289.01 KB
- File Type: .watch file
- Create Date: February 11, 2017
- Last Updated: April 10, 2022
This is a special edition of my Casio G-Shock GW-002E-1VER watchface featuring WMs new color switcher. Using the switcher, you can select the background color. The foreground color will be adjusted automatically.
Here is the description of the normal version (changing the color as described below doesn't work with this edition, use WMs color switcher instead):
History: v3.2: . added step counter and heart rate display (with button D on the bottom right) v3.1: . added tab action in the middle of the watchface to protect against accidentally used tab actions. You need to press the middle tab action to make the 'normal' tab actions active. v3.0: . added a "big" mode, where the outer text disappears and the rest is shown bigger . minor graphical corrections v2.1: . added 4 alternative date formats . added one more color mode (red) . fixed 12 hour display at 12 o'clock . fixed graphic error when changing an alarm in black color mode v2.0: . added three alternative color modes . fixed 12 hour display (was showing PM all the time) . added 12 hour display for world time . fixed wrong display in adjust mode v1.0: initial version Features: . Timekeeping Mode: 12 or 24 hour display, date (alternatively weekday) . World Time Mode: 3 time zones . Alarm Mode: 4 alarms, 1 snooze alarm, hourly signal (alarms can be set, indicators are shown, but alarm will not be triggered (not possible in dim mode)) . Countdown Timer Mode . Stopwatch Mode with split time and two finishes . battery levels (both watch and phone (this is not original of course)) . four color modes: original, black, blue and green . five different date formats . a special "big mode" without the outer ring with the text . step counter and heart rate display . 100% Watchmaker General guide: The watch has five buttons (i.e. five tab actions): button A at top left, button B at top right, button C at bottom left, button D at bottom right and button L at bottom in the middle. Button A is the adjust button, button C is to cycle through the modes. Button B and D are for up and down and button L is to switch on the light (for a short period of time). Display: There are three round displays at the top. The left one shows the seconds in timekeeping mode or the 1/10 of a second in countdown timer and stopwatch mode. The middle top display is the watch battery level indicator. The right one is the phone battery level indicator (on the original watch that's the receiving indicator (time is radio controlled). The battery indicators work as follows: For a battery level of 67 to 100% the top segment is lit. For 34 to 66% the bottom left segment is lit and for 0 to 33% the bottom right segment is lit. If the battery level drops below 15% the bottom right segment flashes. To see the exact battery levels, press button D in timekeeping mode. The script has a configuration section where you can for example switch between 24/12 hour display or select your preferred color mode or date format. You can change this directly on the watch too. Try all settings and if you have found your preferred configuration, change the appropriate variables in the script (so you don't need to change the settings every time you switch the watchface)! Detailed description: In timekeeping mode (the default mode) press B to switch between date display and weekday display. Press D to get an alternating display of watch and phone battery level (original watch will display time and strength of last radio signal). Press D again to show step counter and press the button again to show current heart rate. Note that the configuration section of the script has a variable which can be set to false to disable the step counter and heart rate display. Press A to go to configuration mode. Press C to cycle through the different configuration items. Press D to toggle the value of a configuration item. The following configuration items are available: 24 hour mode / 12 hour mode: in 12 hour mode PM is shown with a P top left of the time display. 2.5 / 1.5 seconds light (when button L is pressed) Power safe on/off: Doesn't make sense on smart watch, just switches the power safe indicator on or off Color mode: original, black, blue, green and red (doesn't exist on original watch) Date format: 8-20 (original), 8/20, 20.8, 20-8 or 20/8 Big mode off/on: If on, the outer ring with the text is not displayed. Instead everything else is bigger. Press button C to cycle through the different modes: World time mode: The original watch shows the world time in 30 cities around the world. This version shows the three world times configured in Watchmaker but showing the city name the original watch would show. Press B or D to cycle through the three time zones. Alarm mode: Press D to cycle through 4 normal alarms, one snooze alarm and the hourly signal alarms. Press B to enable / disable an alarm. Press A to change the time of an alarm (and C to switch between changing hour or minute). Press A again to leave adjust mode. Note: The alarms do not work, it is not possible to get an alarm while the watch is in dim mode! Countdown Timer mode: Press A to change the timer (press B and D to switch minutes between 1 and 60). Like on the original watch you can't change the seconds. Press A again to leave adjust mode. Press D to start the timer. Press D again to pause the timer and press B to reset the timer. If you leave the mode, the timer continues. If the timer reaches 0, the watch vibrates for 2 seconds (and then the time resets again). Note: that only works if watch is in bright mode when timer reaches 0. This is not possible in dim mode! Stopwatch mode: Press D to start/pause the stopwatch. Press B to sets stopwatch to 0 again. While stopwatch runs press B for split time. Press B again to release split time. Two finishes: Start stopwatch with D. Press B when first runner finishes. Press D when second runner finishes. Press B to display time of second runner.